VPN Setup Questions
Hypervenomx proximo ii tf problem isn’t with the software, its with the bandwidth at each end.
You can try other apps like teamviewer for example. I doubt you will have different results though.
You write you have vpn capable routers. You need to understand there are two flavors. VPN pass thru and vpn capable. The pass thru is just that. The vpn tunnel request can “pass thru” the router to the vpn server behind the router. VPN capable refers to a router that can accespt a vpn connection from its software client installed on the remote pc/laptop
But it does not matter how you do it if you don’t have enough bandwidth at both ends which what appears to be going on in this situation.
Ok, so I have a Linksys BEFVP41 VPN router. I’m guessing this what you were referring to as VPN capable.
So if this is the case, I would need to configure it as our office router, configure the VPN options on it, and then do the software setup on the remote machine. Am I correct in this thus far?
Also, I should note, it’s not so much that LogMeIn is slow. The reactions I’m guessing aren’t bad, just very choppy. I did some tampering with port forwarding, and newest football boots out I was able to remotely access the gui on our database, and it’s speed was identical to how it functions in our office, but that’s only a third of the needs we have. We still need access to our office printers, our storage server, and our banking upload software.
I know this does not answer your question but just a word of warning. We used a Linksys RV016 (I know not the same model) router for our hypervenomx proximo ii tf first VPN and had no end to our problems. It worked for a fashion but the Linksys client had compatibility issues and kept crashing or never started. We went to a CISCO router and never looked back. I am not saying hypervenomx proximo ii tf you have to go with CISCO either, I heard that Sonicwall’s VPN is decent, just warning you about Linksys’s VPN.
I am not saying you will have the same problems as we did just an FYI if you want to try to make your VPN work. It looks like you need to get a better ISP to fix your speed issues first.
I am with you on the Third Party VPN, I never trusted another company that has an app installed on my computer that tunnels through my firewall. The number of routers and hardware I’ve been through over the years is what has kept me coming back to Linksys, what with so few problems, but I’ve never really gotten into the software side other than modding with DDWRT, which was a necessity. And firewall issues are what have us to this point now. I can forward the port to the webgui of our dbase, but that basically leaves it right out in the open, for the world to get it’s hands onto. We lost a server that way when Charter changed our hardware. Our DSL modem had a firewall built in an configured, and Charter neglected to inform us that there newest football boots out modem did not. So firewall security here has hypervenomx proximo ii tf become a prime issue hypervenomx proximo ii tf newest football boots out.